What is the fire prevention knowledge of electric bike?

Always check the circuit plug-in points of the electric bike to prevent the contact points from igniting and heating due to weak contact; avoid short circuits and series accidents caused by aging and wear of the circuit. During the normal use of the electric vehicle, if there is a failure, you should choose a professional maintenance organization or personnel. Do not disassemble the electrical protection device without authorization to ensure that the electrical circuit and the protection device are intact and effective. When charging the battery of an electric bicycle, flammable gas will escape. Therefore, the charging must not be carried out in a narrow and sealed environment. It should be done outdoors as much as possible, or the battery should be removed and charged separately. When charging, choose a suitable line, the line should be fixedly installed, and short-circuit and leakage protection devices should be installed.
Electric vehicles must be charged far away from flammable materials. The charging time is too long, the charging time is too long, and the charger is overheated, which may cause fire. The charging should be carried out in accordance with the instructions in the manual. The charging time should not exceed 10 hours in principle. . When charging, the charger should be placed in a place where it is easy to dissipate heat; if the battery of the electric bicycle is of poor quality or used for a long time, the temperature of the charger is likely to be very high and cause a fire, so charging should not be taken lightly during the night sleep time.
When starting and climbing the electric bicycle during the traveling process, you should pedal to help to prevent excessive starting current and long-term overloading of the mechanical parts, causing overheating damage to the motor coil, line, battery and governor, and even causing disasters . Try to avoid driving on rainy days and water-filled roads to prevent the motor from entering water and short-circuiting and catching fire during charging.
In addition, when buying electric vehicles, lithium batteries should be the first choice. It has large capacity, low self-consumption, and low pollution. Secondly, the lead-acid dry battery has good sealing and is not easy to leak electrolyte. It is necessary to prevent pollution, corrosion and damage caused by electrolyte leakage. When buying an electric car, you must read the product manual and operate according to the manual, and choose the battery that matches the electric car, charger, motor model, and specification.